20.5-Inch-Mirror-Blank-Project

From *** Mirror Project Wiki ***
Jump to navigation Jump to search

Originally I started with a 16 inch circular cutout mirror blank. Circular is a bad choice due to concentrating stress in the narrowest part of the webbing. The 20.5 inch casting was designed with a hexagonal webbing. The photo on the right shows the general layout. The original autocad dwg file is here: Media:20.5-Hex-Pattern-Layout.dwg


Mold Master Generation

All the techniques used to generate the 16.2-Inch-Mirror-Blank-Project were used here to make the plaster master. The plaster master is destroyed generally by the de molding process of the silastic rubber mirror blank positive.

The outer rim of the master also has the 5 degree taper in the with the bottom diameter being smaller than the mirror faceplate diameter.

Retrieved from "http://www.mirrorproject.amarketplaceofideas.com/index.php?title=20.5-Inch-Mirror-Blank-Project&oldid=45"